16 ft tower
A 4 ft square base makes this the tidier choice for smaller gardens, courtyards and entrances. It uses the same material and bracing as the taller tower.
Every Jewell windmill is designed by a professional engineer licensed in Ontario, Alberta and the State of Michigan, and built from the heaviest galvanized material we can buy. Here is exactly what you get, part by part.
Please note: the Jewell windmill is an ornamental piece. It does not currently have the capability to generate electricity, pump water or aerate ponds.
Part one
The fan head is the heart of the windmill, and it is where the Jewell design separates itself from cheaper ornamentals. It carries a self-limiting speed regulator that turns the fan out of the wind in a gust, plus a manual shut-off option so you can stop the blades turning whenever you like.
Download the windmill head dimension drawing (PDF) for mounting measurements.
Blades do not come painted. They are supplied in bare galvanized steel so you can leave them natural or finish them yourself. The tail fin is supplied with “Jewell Windmills” stencilled in red on one side unless you request it blank. The axle and vertical shaft come powder coated red.
Part two
Two tower heights are available. Both are built from 18 gauge Z700 galvanized material, arrive bolted rather than welded, and accept the optional platform and earth anchors.
A 4 ft square base makes this the tidier choice for smaller gardens, courtyards and entrances. It uses the same material and bracing as the taller tower.
The full-height windmill, with a 6 ft square base and three bolted tower sections. This is the silhouette most people picture when they think of a farm windmill.
Part three
A wooden platform adds character to the windmill and serves as a safe standing surface for maintenance. The platform package includes a 1 inch thick wood deck, two supporting beams and all fasteners.
Part four
Earth anchors are an attractive alternative to concreting your windmill in place (depending on soil conditions). They are an easy and inexpensive way to secure the tower, and they give you the flexibility to move the windmill later. No special tools or training are required to install them.
The anchors are galvanized for a long service life and measure 38 inches in length.
Freight
Each windmill is professionally packed to ensure damage-free delivery. Components ship in the separate packages listed below, which is also what our shipping calculator uses to estimate freight.
| Package | Contents | Weight (lb) | Dimensions (in) |
|---|---|---|---|
| A | Windmill head | 120 | 50 × 28 × 8 |
| B | Tail arms | 9 | 54 × 2 × 2 |
| C | Tower top section (16 ft / 24 ft) | 73 | 102 × 3 × 4 |
| D | 24 ft tower mid section | 79 | 102 × 3 × 4 |
| E | 24 ft tower bottom section | 49 | 102 × 3 × 4 |
| F | Tower fasteners (16 ft / 24 ft) | 20 | 14 × 8 × 6 |
| G | 16 ft tower bottom section | 30 | 102 × 3 × 4 |
| H | Earth anchors | 18 | 38 × 12 × 4 |
Read the shipping and delivery guide, or estimate freight with the US calculator or the Canadian calculator.
Send us a photo or the dimensions of the space and we will tell you honestly which windmill fits best.