Heavy galvanized steel
18 gauge Z700 galvanized material — the thickest commercially available zinc coating — on every tower component. Read how galvanizing protects the steel.
Both towers use exactly the same material, the same fan head and the same hardware. The only real differences are height, the size of the base footprint and how they sit in a landscape. Here is how to choose.
| Specification | 16 ft tower | 24 ft tower |
|---|---|---|
| Overall tower height | 16 ft | 24 ft |
| Base footprint | 4 ft square | 6 ft square |
| Tower sections | Two bolted sections | Three bolted sections |
| Leg material | 2½ in angle with folded safety edge | 2½ in angle with folded safety edge |
| Diagonal braces | 1 × 1 in angle | 1 × 1 in angle |
| Tower steel | 18 gauge Z700 galvanized | 18 gauge Z700 galvanized |
| Tower package weights | 73 lb top, 30 lb bottom, 20 lb fasteners | 73 lb top, 79 lb mid, 49 lb bottom, 20 lb fasteners |
| Fan and tail packages | 120 lb head, 9 lb tail arms | 120 lb head, 9 lb tail arms |
| Platform option | Yes | Yes |
| Earth anchors | Yes — 38 in galvanized set | Yes — 38 in galvanized set |
| Typical setting | Gardens, courtyards, entrances | Farmyards, acreage, commercial landscaping |
Package weights are the published shipping weights from our packaging table.
Option one
The 16 ft tower stands at roughly the height of a single-storey roof line, which makes it easy to place without dominating a garden. Its 4 ft square base needs a much smaller patch of ground than the taller tower, so it fits comfortably into a courtyard, beside a walkway or at the corner of a perennial bed.
Because there are only two tower sections plus the fasteners, two people can raise it in a morning. It uses the same fan head as the 24 ft tower, so the fan and the windmill silhouette are identical — you simply see less tower below it.
Option two
The 24 ft tower is the full farm windmill silhouette. It uses a 6 ft square base and ships in three bolted sections, so it stands well clear of fences, hedges and outbuildings and reads clearly from a distance.
Choose this height when the windmill needs to be seen — on an acreage, at the entrance to a farm lane, in a commercial landscape, or anywhere the windmill is meant to be a landmark rather than a garden detail. The three tower sections and the wider base mean slightly more assembly time than the 16 ft version.
Shared by both
18 gauge Z700 galvanized material — the thickest commercially available zinc coating — on every tower component. Read how galvanizing protects the steel.
Everything is bolted with the fasteners supplied, so a tower can be taken down and moved if you relocate it rather than being welded into place.
2½ inch angle legs with a folded safety edge, braced with 1×1 inch angles that are inherently stiffer than flat strip bracing.
A 1 inch thick deck with two beams and fasteners — a maintenance surface that also adds character. Platform details.
38 inch galvanized anchors secure the tower without concrete and let you move it later. Earth anchor details.
Both towers carry the six-foot, 18-blade fan head with sealed pillow block bearings and the self-limiting speed regulator.
Still unsure? Email a photo of the spot to info@jewellwindmills.com and we will tell you honestly which height suits it — we would rather you were happy than oversold.
Both heights are available on our order calculators, with freight estimated from your ZIP code or Canadian postal code range.